Ps3 Hardware Downgrading
Page 1 of 1
Ps3 Hardware Downgrading
The Ultimate Fool Proof Guide:
Ps3 hardware downgrading
You Can Downgrade From all firmware versions. its the PS3 model that is important
CHECK YOUR PS3 MODEL TO SEE IF IT CAN BE DOWNGRADED
Locate the manufacturing date code found on the base of your ps3.
it will look like this
Ps3 hardware downgrading
You Can Downgrade From all firmware versions. its the PS3 model that is important
CHECK YOUR PS3 MODEL TO SEE IF IT CAN BE DOWNGRADED
Locate the manufacturing date code found on the base of your ps3.
it will look like this
Where you see the “xx” part below you will see numbers on your ps3.
so the image above shows CECH-4003A but it will be in the below table as CECH-40XX the last 2 numbers do not affect whether it can be downgraded or not so we don’t need to list that part.
Now use DEFAULTDNB's PPC+ MD5 & DATE CHECK TOOL (DCT)v2.5.0.2E Click here
follow the steps below
- Phat type Ps3's:
- CECHAxx (OK To Downgrade) NAND = Progskeet / TEENSY++ 2.0 / InFeCtuS
CECHBxx(OK To Downgrade) NAND = Progskeet / TEENSY++ 2.0 / InFeCtuS
CECHCxx(OK To Downgrade) NAND = Progskeet / TEENSY++ 2.0 / InFeCtuS
CECHExx (OK To Downgrade) NAND = Progskeet / TEENSY++ 2.0 / InFeCtuS
CECHGxx (OK To Downgrade) NAND = Progskeet / TEENSY++ 2.0 / InFeCtuS
CECHHxx(OK To Downgrade) NOR = Teensy++ 2.0 / Progskeet / E3 Flasher
CECHJxx (OK To Downgrade) NOR = Teensy++ 2.0 / Progskeet / E3 Flasher
CECHKxx (OK To Downgrade) NOR = Teensy++ 2.0 / Progskeet / E3 Flasher
CECHLxx (OK To Downgrade) NOR = Teensy++ 2.0 / Progskeet / E3 Flasher
CECHMxx(OK To Downgrade) NOR = Teensy++ 2.0 / Progskeet / E3 Flasher
CECHPxx (OK To Downgrade) NOR = Teensy++ 2.0 / Progskeet / E3 Flasher
CECHQxx (OK To Downgrade) NOR = Teensy++ 2.0 / Progskeet / E3 Flasher
DECHAxx (OK To Downgrade)
- Slim Type Ps3's:
- CECH-20xx(OK To Downgrade) NOR = Teensy++ 2.0 / Progskeet / E3 Flasher
CECH-21xx (OK To Downgrade) NOR = Teensy++ 2.0 / Progskeet / E3 Flasher
CECH-25xxA or B (with date code [0C] [0D] [1A] are known to be ok) NOR = Teensy++ 2.0 / Progskeet / E3 Flasher
ALL THE REST(DOUBLE CHECK THIS with MinVerChk from HERE IF IT SAYS 3.55 OR BELOW YOU CAN DOWNGRADE TO 3.55
IF IT SAYS 3.56 THEN YOU MUST GO TO THE LATEST CFW DO NOT GO TO 3.55
IF IT SAYS 3.60 THEN YOU MUST NOT DOWNGRADE AT ALL OR YOU WILL BRICK THE CONSOLE)
CECH-30xx (CANNOT Downgrade)
CECH-40XX (CANNOT Downgrade)
This information was taken from HERE & HERE & HERE
- Required Tools for Downgrading:
- 1. a NAND or NOR Programmer:
- 2.progskeet 1.2 / 1.21:
ProgSkeet 1.2 / 1.21 full kit
NAND
1c. NAND 48 pin 360-clip (360-clip old type)
1d NAND 48 pin uni-clip (360-clip new type)
1e. buck transformer (variable voltage regulator) the following is a uk link but can be bought world wide.
NOR
1a NOR 56 pin 360-clip (360-clip old type)
1b NOR 56 pin uni-clip (360-clip new type)- 3.Teensy++ 2.0 NOR & NAND:
I didn't realise the PA pads were not part of the pre soldered points.
some additional pins will need to be ordered and attached to the missing points
http://www.pjrc.com/store/header_12x1.html
the needed extra pins for the 8 PA points and the E4 & E5 points (although the E4 & E5 pins not needed for NAND)
http://www.pjrc.com/store/mcp1825.html
The needed volt reg
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|